How To Resolve The DNS Probe Finished Bad Configuration Error? Solved In [2022]

Are you seeing the DNS probe finished bad configuration error on your computer? Don’t worry, you’re not alone. This is a common issue that can be fixed relatively easily. In this article, we’ll show you how to resolve the DNS probe finished bad configuration error in under 20 minutes.

Why DNS probe finished bad configuration error happens?

There can be several reasons for the DNS probe finished bad configuration error. The most common reason is that your computer’s DNS cache has become corrupt. This can happen if you’ve recently installed a new software program or made changes to your network settings. Other causes include malware or spyware infections, incorrect network settings, and outdated drivers.

How to fix DNS probe finished bad configuration error?

Flush your DNS settings:

The first thing you should do is flush your DNS settings. This will clear your DNS cache and may resolve the issue. To flush your DNS settings, open the Command Prompt and type “ipconfig /flushdns”. Press Enter and then close the Command Prompt.

Restart your computer:

If flushing your DNS settings doesn’t work, try restarting your computer. This will refresh all of your network settings and may fix the issue.

Reset your network adapter:

If you’re still seeing the DNS probe finished bad configuration error, try resetting your network adapter. To do this, open the Control Panel and go to Network and Sharing Center > Change Adapter Settings. Right-click on your network adapter and select “Disable”. Wait a few seconds and then right-click on the adapter again and select “Enable”.

Change your DNS server:

If you’re still seeing the DNS probe finished bad configuration error, you can try changing your DNS server. To do this, open the Control Panel and go to Network and Sharing Center > Change Adapter Settings. Right-click on your network adapter and select “Properties”. Click on “Internet Protocol Version 4 (TCP/IPv4)” and click “Properties”. Select “Use the following DNS server addresses” and enter 8.8.8.8 for the Preferred DNS server and 8.8.4.4 for the Alternate DNS server. Click OK to save your changes.

Update your network drivers:

If you’re still seeing the DNS probe finished bad configuration error, you may need to update your network drivers. To do this, open the Device Manager and expand the “Network adapters” category. Right-click on your network adapter and select “Update Driver Software”. Click “Search automatically for updated driver software” and follow the prompts to install any available updates.

Disconnect VPNs:

If you’re using a VPN, try disconnecting from it and see if that fixes the issue.

Turn off your firewall:

If you have a firewall enabled, try disabling it and see if that fixes the issue.

Reinstall your network adapter drivers:

If you’re still seeing the DNS probe finished bad configuration error, you may need to reinstall your network adapter drivers. To do this, open the Device Manager and expand the “Network adapters” category. Right-click on your network adapter and select “Uninstall”. Restart your computer and Windows will automatically install the latest drivers for your network adapter.

Perform a clean boot:

If you’re still seeing the DNS probe finished bad configuration error, try performing a clean boot. This will start Windows with a minimal set of drivers and programs to help troubleshoot the issue. To perform a clean boot, open the Command Prompt and type “msconfig”. Press Enter and then go to the “Services” tab. Check the “Hide all Microsoft services” checkbox and click “Disable all”. Go to the “Startup” tab and click “Open Task Manager”. In Task Manager, select each item in the “Startup” tab and click “Disable”. Close Task Manager and click “OK” in System Configuration. Restart your computer and see if the issue is resolved.

Reset your Winsock settings:

If you’re still seeing the DNS probe finished bad configuration error, you may need to reset your Winsock settings. This will reset your network settings and may fix the issue. To reset your Winsock settings, open the Command Prompt and type “netsh winsock reset”. Press Enter and then restart your computer.

Reinstall your network adapter:

If you’re still seeing the DNS probe finished bad configuration error, you may need to reinstall your network adapter. To do this, open the Device Manager and expand the “Network adapters” category. Right-click on your network adapter and select “Uninstall”. Restart your computer and Windows will automatically install the latest drivers for your network adapter.

Run the Windows Network Diagnostics tool:

If you’re still seeing the DNS probe finished bad configuration error, you can try running the Windows Network Diagnostics tool. To do this, open the Control Panel and go to Network and Sharing Center > Change Adapter Settings. Right-click on your network adapter and select “Diagnose”. Follow the prompts to run the diagnostics tool and see if it can fix the issue.

Reset your TCP/IP settings:

If you’re still seeing the DNS probe finished bad configuration error, you may need to reset your TCP/IP settings. This will reset your network settings and may fix the issue. To reset your TCP/IP settings, open the Command Prompt and type “netsh int ip reset”. Press Enter and then restart your computer.

Try using different browser than Chrome:

If you’re still seeing the DNS probe finished bad configuration error, try using a different browser than Chrome. You can try Microsoft Edge, Firefox, or Opera.

Check your HOST file:

If you’re still seeing the DNS probe finished bad configuration error, you may need to check your HOST file. The HOST file is used to map hostnames to IP addresses and may be causing the issue. To check your HOST file, open the File Explorer and go to C:\Windows\System32\drivers\etc. Right-click on the HOST file and select “Open with”. Select “Notepad” from the list of programs and then click “OK”. If you see any entries in the HOST file that are redirecting to an IP address, delete them and save the file.

How do I fix DNS probe finished bad configuration?

There are a few different ways to fix this problem.

First, you can try using a different DNS server. Many internet service providers offer their own DNS servers, so switching to one of those might help. You can also try clearing your browser’s cache and cookies, which might help if the problem is caused by outdated information in your browser.

If neither of those solutions works, you can try resetting your network adapter. This will clear any outdated information that might be causing the problem.

Finally, if you’re still having trouble, you can contact your ISP and ask them to help you troubleshoot the problem.

How do I clear my DNS cache?

Clearing your DNS cache can help resolve DNS-related errors. To clear your DNS cache on Windows, open the Command Prompt and type “ipconfig /flushdns”. Press Enter and then restart your computer. On Mac, open the Terminal and type “dscacheutil -flushcache”. Press Enter and then restart your computer. On Linux, you can use the “nscd” or “dnscache” commands to flush your DNS cache.

What does DNS probe finished bad config?

DNS, or Domain Name System, is a protocol used to resolve domain names into IP addresses. DNS probe finished bad config means that the domain name could not be resolved because of a bad configuration.

This can happen if the DNS server is down, if the DNS server is not responding, or if there is a problem with the DNS configurations. If you see this error message, it means that you will not be able to access the website or service that you are trying to reach.

In order to fix this problem, you will need to contact your DNS provider and ask them to fix the issue. Once they have fixed the issue, you should be able to access the website or service that you were trying to reach.

How do I fix DNS probe finished bad config Windows 7?

If you’re receiving the “DNS probe finished bad config” error on your Windows 7 computer, there are a few potential solutions.

First, try power cycling your router. This will reset your DNS server and may fix the problem. If that doesn’t work, you can try flushing your DNS cache. This will remove any outdated entries that may be causing the issue.

To do this, open the Command Prompt and type “ipconfig /flushdns”.

You can try changing your DNS server to a public one such as Google’s DNS server. To do this, go to your network settings and enter 8.8.8.8 as your preferred DNS server. If none of these solutions work, you may need to contact your ISP for further assistance.

How do I get rid of DNS error in Chrome?

DNS errors are often caused by incorrect DNS settings or issues with your ISP’s DNS servers. To fix a DNS error in Chrome, you can try changing your DNS settings to use a public DNS server like Google Public DNS or OpenDNS. You can also try flushing your DNS cache or resetting your network adapter. If these methods don’t work, you may need to contact your ISP for further assistance.

How do I resolve a DNS problem?

One way to resolve a DNS problem is to use a public DNS server. There are many free and reliable public DNS servers available, such as Google Public DNS and Cloudflare DNS. To use a public DNS server, you will need to configure your network settings to use the DNS server’s IP address.

Once you have done this, your computer will resolve DNS queries using the public DNS server instead of your ISP’s DNS server. This can help to improve speeds and reliability, as well as providing you with access to features that may be blocked by your ISP’s DNS server.

Another way to resolve a DNS problem is to use a VPN. A VPN encrypts all of your traffic and routes it through a server in another location. This can help to bypass restrictions imposed by your ISP, as well as providing you with an additional layer of privacy and security.

If you are having difficulty accessing a website, try changing your DNS settings or using a VPN. These solutions can often help to resolve the problem.

What causes DNS_PROBE_FINISHED_NXDOMAIN?

There are a number of possible causes for the DNS_PROBE_FINISHED_NXDOMAIN error.

One common cause is simply entering the wrong URL into your browser.

Another possibility is that the website you’re trying to reach is no longer active.

However, the most likely cause is that your DNS settings are incorrect. DNS, or Domain Name System, is responsible for translating web addresses into IP addresses. If your DNS settings are pointing to the wrong server, you may see this error.

Fortunately, you can usually fix this problem by changing your DNS settings to use a different server. Once you’ve made the change, you should be able to access the website without any issue.

Final Verdict:

These are just a few things that you can try to fix the DNS probe finished bad configuration error. If you’re still seeing the error, you may need to contact your ISP or IT department for further assistance.

If you’re still seeing the DNS probe finished bad configuration error, it’s likely that there’s an issue with your drivers. To update your drivers, you can use a free driver updater tool or visit your hardware manufacturer’s website.